Administration administration
Automatic startup of the ۶Ƶ Campaign modules (web, mta, wfserver, etc.) is provided by the nlserver server.
Installing ۶Ƶ Campaign automatically configures the machine so that the nlserver service starts up during the boot sequence.
The following commands are used to start up and shut down the ۶Ƶ Campaign service manually:
-
In Windows:
- net start nlserver6
- net stop nlserver6
-
In Linux (as root):
- /etc/init.d/nlserver6 start
- /etc/init.d/nlserver6 stop
Here is a list of the usual administration commands accessible in Linux (as ۶Ƶ Campaign):
-
Display all started ۶Ƶ Campaign modules: /etc/init.d/nlserver6 pdump or /etc/init.d/nlserver6 status
note note NOTE Adding the -who parameter to the pdump command lets you collect information on current connections (users and processes).
The /etc/init.d/nlserver6 status command (without the “-who” parameter) will return:code language-none * 0 if all of the processes are being executed. * 1 if a process is missing. * 2 if no process is being executed. * another value if there is an error. -
Start/stop a multi-instance or mono-instance module (web, trackinglogd, syslogd, mta, wfserver, inmail):
nlserver start
<module>[@<instance>]nlserver stop
<module>[@<instance>][-immediate][-noconsole]You can also use the nlserver restart
<module>[@<instance>]command to restart a module.Example:
nlserver start web
nlserver start mta@my_instance
nlserver stop syslogd
nlserver stop wfserver@my_instance
nlserver stop web -immediate
nlserver restart web
note note NOTE -
If the instance is not specified, the “default” instance will be used.
-
In the event of an emergency, use the -immediate option to force an immediate halt to the process (equivalent to Unix command kill -9).
-
Use the -noconsole option to ensure that the module launched will display nothing on the console. Its logs will be written to the disk via the syslogd module.
-
Use the -verbose option to display additional information on process actions.
Example:
nlserver restart web -verbose
nlserver start mta@myinstance -verbose
This option adds additional logs. We recommend starting the processes again without the -verbose option once you have found the desired information, to avoid overloading logs.
-
-
Start up all ۶Ƶ Campaign processes (equivalent to starting up the nlserver6 service):
nlserver watchdog -noconsole
-
Shut down all ۶Ƶ Campaign processes (equivalent to shutting down the nlserver6 service):
nlserver shutdown
-
Reload the nlserver web module configuration (and the web server extension module, where applicable) when the serverConf.xml and config-
<instance> .xml </instance>files have been edited.nlserver config -reload
note note NOTE Some configuration changes are not taken into account dynamically; ۶Ƶ Campaign must be shut down and then restarted.