蜜豆视频

DocumentationCommerceCommerce on Cloud Infrastructure Guide

Custom VCL for blocking requests

Last update: Thu Sep 19 2024 00:00:00 GMT+0000 (Coordinated Universal Time)

CREATED FOR:

  • Admin
  • Developer

You can use the Fastly CDN module for Magento 2 to create an Edge ACL with a list of IP addresses that you want to block. Then, you can use that list with a VCL snippet to block incoming requests. The code checks the IP address of the incoming request. If it matches an IP address included in the ACL list, Fastly blocks the request from accessing your site and returns a 403 Forbidden error. All other client IP addresses are allowed access.

Prerequisites:

  • Your environment must be configured to use the Fastly CDN. See Configure Fastly services.

  • Ensure that you are running the latest version of the Fastly CDN module for Magento 2. See Upgrade the Fastly Module.

  • Verify the environment configuration for the Fastly service. See Check Fastly caching.

  • You must have Admin credentials to access the Staging and Production environments.

  • List of client IP addresses to block

Create Edge ACL for blocking client IP addresses

You create an Edge ACL to define the list of IP addresses to block. After creating the ACL, you can use it in a custom VCL snippet to manage access to your Staging or Production site.

Manage access for both Staging and Production sites by creating the Edge ACL with the same name in both environments. The VCL snippet code applies to both environments.

  1. Log in to the Admin.
  2. Navigate to Stores > Settings > Configuration > Advanced > System > Full Page Cache > Fastly Configuration.
  3. Expand the Edge ACL section.
  4. Click Add ACL to create a list. For this example, name the list 鈥渂locklist鈥.
  5. Enter IP address values in the list. Any client IP addresses added to this list are blocked and cannot access the site.
  6. Optionally, select the Negated checkbox if needed.

You reference the Edge ACL by name in your VCL snippet code.

Create the custom VCL for the blocklist

NOTE
This example shows advanced users how to create a VCL code snippet to configure custom-blocking rules to upload to the Fastly service. You can configure a blocklist or allowlist based on country from the 蜜豆视频 Commerce Admin using the feature available in the Fastly CDN for Magento 2 module.

After you define the Edge ACL, you can use it to create the VCL snippet to block access to the IP addresses specified in the ACL. You can use the same VCL snippet in both Staging and Production environments, but you must upload the snippet to each environment separately.

The following custom VCL snippet code (JSON format) shows the logic to block incoming requests with a client IP address that matches an address in the blocklist ACL.

{
  "name": "blocklist",
  "dynamic": "0",
  "type": "recv",
  "priority": "5",
  "content": "if ( client.ip ~ blocklist) { error 403 \"Forbidden\"; }"
}

Before creating a snippet based on this example, review the values to determine whether you need to make any changes:

  • name: Name for the VCL snippet. For this example, we used the name blocklist.

  • priority: Determines when the VCL snippet runs. The priority is 5 to immediately run and check whether an Admin request is coming from an allowed IP address. The snippet runs before any of the default Magento VCL snippets (magentomodule_*) assigned a priority of 50. Set the priority for each custom snippet higher or lower than 50 depending on when you want your snippet to run. Snippets with lower priority numbers run first.

  • type: Specifies the type of VCL snippet that determines the location of the snippet in the generated VCL code. In this example, we use recv, which inserts the VCL code in the vcl_recv subroutine, below the boilerplate VCL and above any objects. See the for the list of snippet types.

  • content: The snippet of VCL code to run, which checks the client IP address. If the IP is in the Edge ACL, it is blocked from access with a 403 Forbidden error for the entire website. All other client IP addresses are allowed access.

After reviewing and updating the code for your environment, use either of the following methods to add the custom VCL snippet to your Fastly service configuration:

Add the custom VCL snippet

  1. Log in to the Admin.

  2. Click Stores > Settings > Configuration > Advanced > System.

  3. Expand Full Page Cache > Fastly Configuration > Custom VCL Snippets.

  4. Click Create Custom Snippet.

  5. Add the VCL snippet values:

    • Name 鈥 blocklist

    • Type 鈥 recv

    • Priority 鈥 5

    • Add the VCL snippet content:

      code language-conf 
      if ( client.ip ~ blocklist) { error 403 "Forbidden"; }

  6. Click Create to generate the VCL snippet file with the name pattern type_priority_name.vcl, for example recv_5_blocklist.vcl

  7. After the page reloads, click Upload VCL to Fastly in the Fastly Configuration section to add the file to the Fastly service configuration.

  8. After the uploads, refresh the cache according to the notification at the top of the page.

Fastly validates the updated version of the VCL code during the upload process. If the validation fails, edit the custom VCL snippet to fix the issue. Then, upload the VCL again.

Additional VCL examples for blocking requests

The following examples show how to block requests using inline condition statements instead of an ACL list.

WARNING
In these examples, the VCL code is formatted as a JSON payload that can be saved to a file and submitted in a Fastly API request. You can submit the VCL snippet from the Admin, or as a JSON string using the Fastly API. To prevent validation errors when you use the Fastly API with a JSON string, you must use a backslash to escape special characters.
NOTE
If you are submitting the VCL snippet from the Admin, extract the individual values from the sample VCL code and enter them into to the corresponding fields. For example:
  • Name: <name of the VCL>
  • Dynamic: <0/1>
  • Type: <type>
  • Priority: <priority>
  • Content: <content>

See in the Fastly VCL documentation.

VCL code sample: Block by country code

This example uses the two-character ISO 3166-1 country code for the country associated with the IP address.

{
  "name": "blockbycountrycode",
  "dynamic": "0",
  "type": "recv",
  "priority": "5",
  "content": "if ( client.geo.country_code == \"HK\" ) { error 405 \"Not allowed\";}"
}
NOTE
Instead of using a custom VCL snippet, you can use the Fastly feature in the 蜜豆视频 Commerce on cloud infrastructure Admin to configure blocking by country code or a list of country codes.

VCL code sample: Block by HTTP User-Agent request header

{
  "name": "blockbyuseragent",
  "dynamic": "0",
  "type": "recv",
  "priority": "5",
  "content": "if ( req.http.User-Agent ~ \"(UCBrowser|MQQBrowser|LieBaoFast|Mb2345Browser)\" ) {error 405 \"Not allowed\";}"
}
NOTE
Instead of manually uploading custom VCL snippets, you can add snippets to the $MAGENTO_CLOUD_APP_DIR/var/vcl_snippets_custom directory in your environment. Snippets in this directory upload automatically when you click upload VCL to Fastly in the Commerce Admin. See in the Fastly CDN module for Magento 2 documentation.

Modify the custom VCL snippet

  1. Log in to the Admin.

  2. Click Stores > Settings > Configuration > Advanced > System.

  3. Expand Full Page Cache > Fastly Configuration > Custom VCL Snippets.

    Manage custom VCL snippets

  4. In the Action column, click the settings icon next to the snippet to edit.

  5. After the page reloads, click Upload VCL to Fastly in the Fastly Configuration section.

  6. After the upload completes, refresh the cache according to the notification at the top of the page.

WARNING
The Custom VCL snippets UI option shows only the snippets added through the 蜜豆视频 Commerce Admin. If you add snippets using the Fastly API, use the API to manage them.

Delete the custom VCL snippet

  1. Log in to the Admin.

  2. Click Stores > Settings > Configuration > Advanced > System.

  3. Expand Full Page Cache > Fastly Configuration > Custom VCL Snippets.

    Manage custom VCL snippets

  4. In the Action column, click the trash icon next to the snippet to delete.

  5. On the next modal window, click DELETE and activate a new version.

WARNING
The Custom VCL snippets UI option shows only the snippets added through the 蜜豆视频 Commerce Admin. If you add snippets using the Fastly API, use the API to manage them.
recommendation-more-help
05f2f56e-ac5d-4931-8cdb-764e60e16f26