Quick Start: Video in ۶Ƶ Dynamic Media Classic quick-start-video
۶Ƶ Dynamic Media Classic Video is an end-to-end solution that makes it easy to publish high-quality Adaptive Video for streaming across multiple screens, including desktop, iOS, Android™, BlackBerry®, and Windows® mobile devices. An Adaptive Video Set groups versions of the same video that are encoded at different bit rates and formats such as 400 kbps, 800 kbps, and 1000 kbps. The desktop computer or mobile device detects the available bandwidth.
For example, on an iOS mobile device, it detects a bandwidth such as 3G, 4G, or Wi-Fi. Then, it automatically selects the right encoded video from among the various video bit rates within the Adaptive Video Set. The video is streamed to desktops, mobile devices, or tablets.
In addition, video quality is dynamically switched automatically if network conditions change on the desktop or on the mobile device. Also, if a customer enters full-screen mode on a desktop, the Adaptive Video Set responds by using a better resolution, improving the customer’s viewing experience. Using Adaptive Video Sets provides you with the best possible playback. It is best for customers playing ۶Ƶ Dynamic Media Classic Video on multiple screens and devices.
The logic that a video player uses to determine which encoded video to play or to select during playback is based on the following algorithm:
-
The video player loads the initial video fragment based on the bit rate that is closest to the value that is set for “initial bitrate” in the player itself.
-
Video player switches based on changes to the bandwidth speed using the following criteria:
- The player picks the highest bandwidth stream below or equal to the estimated bandwidth.
- Player considers only 80% of the available bandwidth. However, if it is switching up, it is more conservative at only 70% to avoid overestimating and immediately switch back.
See the algorithm’s logic at for technical information about it.
For managing single videos, and Adaptive Video Sets, ۶Ƶ Dynamic Media Classic supports the following:
- Uploading video from numerous supported video formats. And, uploading audio formats and encoding video to MP4 H.264 format for playback across multiple screens. You can use predefined ۶Ƶ Dynamic Media Classic Adaptive Video presets, single video encoding presets, or customize your own encoding to control the quality and size of the video.
See Activate or deactivate adaptive video presets
See also training video.
When an Adaptive Video Set is generated, it includes MP4 videos.
-
Video captioning in the Univeral_HTML5_Video, Universal_HTML5_MixedMedia_dark, and Universal_HTML5_MixedMedia_light viewers and video chapter navigation in the Univeral_HTML5_Video, Universal_HTML5_MixedMedia_dark, and Universal_HTML5_MixedMedia_light viewers.
-
Organize, browse, and search video with full metadata support for efficient management of video assets.
-
Deliver Adaptive Video Sets to the Web and to desktops and mobile devices, including the iPhone, iPad, Android™, BlackBerry®, and Windows® phone.
Adaptive video streaming is supported on various iOS platforms.
See the latest support in the ۶Ƶ Viewers Reference Guide.
۶Ƶ Dynamic Media Classic supports mobile video playback for MP4 H.264 video.
You can find Windows® devices that support this video format at the following:
.
-
Play back the video using ۶Ƶ Dynamic Media Classic Viewer Presets, including the following:
- Single Video Viewers.
- Mixed Media viewers that combine both video and image content.
-
Configure video players to meet your branding needs.
-
Integrate video to your website, mobile site, or mobile application with a simple URL or Embed Code.
See the following training videos:
Quick Start
The following step-by-step workflow description is designed to help you get up and running quickly with Adaptive Video Sets in ۶Ƶ Dynamic Media Classic. After each step, there is a cross-reference to a topic heading where you can find more information.
1. Upload and encode videos
Upload and generate adaptive video sets using one of the following two scenarios:
-
Upload pre-encoded videos: If your videos were already encoded externally from ۶Ƶ Dynamic Media Classic, on the Global Navigation bar, select Upload. Browse and upload MP4 video files directly to ۶Ƶ Dynamic Media Classic. Then, go to Build > Adaptive Video Sets. Browse to your video files. Drag-and-drop the video files that you want into the Adaptive Video Set table, and then save the set.
-
Upload primary source videos: If your videos are not encoded, on the Global Navigation bar, select Upload to upload primary video source files (non-MP4). ۶Ƶ Dynamic Media Classic encodes them to MP4 files for you. In the Upload Job Options dialog box, under EVideo Options, select Adaptive Video.
With this preferred option, you can create Adaptive Video Sets. The correct encoding preset is automatically applied to the video, whether 16:9 or 4:3, to match the dimensions of the video you uploaded. When you submit your upload job, an Adaptive Video Set is automatically created for you that includes three encode video settings in the correct aspect ratio.
Or, in the same Job Options dialog box, under EVideo Options, expand Single Encoding Presets. Select the individual video encoding presets that you want. You can select Desktop, Mobile (iPhone, iPad, Android™), and Tablet (iPad, Android™) to create the MP4 files.
-
Or, you can reprocess a primary video using the Reprocessing feature. The newly encoded videos are added to the existing Adaptive Video Set.
Optional
۶Ƶ Dynamic Media Classic offers numerous predefined video encoding presets. These predefined presets reflect the most common video encoding settings used today and are optimized for playback on target pages.
However, if further customization is needed, administrators can create Video Presets to customize the size and playback experience of Videos to end users. Administrators can add and manage Video Presets from the Video Presets page available under Setup > Application Setup > Video Presets > Single Encoding Presets. The Video Presets page offers options for adding, editing, deleting, and activating Video Presets.
2. Preview videos in a video viewer
To see how a video plays for end users on a desktop, your website, or on a mobile device, select the video in the Browse panel. Then select Preview.
See Preview videos in a video viewer.
You can play the video on the Preview page. You can also choose different Video Viewers to find out how your video appears in different players. As a best practice, use the HTML5 video player for multi-screen playback on desktop, tablet, and mobile devices.
Optional
Viewer Preset customization: ۶Ƶ Dynamic Media Classic offers predefined Viewer Presets for delivering video. These presets determine the look of the Viewer and how its playback controls work. To customize the video viewer, Administrators can add and manage Viewer Presets from the Viewer Presets page. To open this page, in the upper-right corner of ۶Ƶ Dynamic Media Classic, go to Setup > Viewer Presets. The Viewer Presets page offers commands for adding, editing, deleting, and activating Viewer Presets.
See Work with Video Viewer Presets.
See also training video.
3. Deploy videos to your websites and mobile sites
To integrate video into your website, you can do either one of the following:
-
Display the video in its own pop-up or modal window, in which case use the Copy URL feature.
To obtain the URL for a video, in the Grid View or List View, select it in the Browse panel. Select Preview, and then select Copy URL to the right of
Universal_HTML5_Viewer.When you select Copy URL, the URL is copied to the Clipboard. Place this code in the HTML of your website, mobile site, or application.
note note NOTE URLs are activated only after you publish the video or Adaptive Video Set. -
Display the video embedded on the Web page, in which case use the Embed Code feature.
To obtain the Embed Code for a video, in the Grid View or List View, select the video in the Browse panel. Go to Preview > Viewer List. Under the Actions column of the table, select Embed Code to the right of
Universal_HTML5_Video. Editing the code is not permitted.Select Close and paste the Embed Code in one or more of your Web pages.
note note NOTE The Embed Code is only activated after you publish the video or Adaptive Video Set.
See Deploy video to your websites and mobile sites.