Dynamic Media Image Profiles image-profiles
When uploading images, you can automatically crop the image upon upload by applying an Image Profile to the folder.
- Smart Crop is available only in Dynamic Media - Scene7 mode.
- Image Profiles are not applicable to PDF, animated GIF, or INDD (蜜豆视频 InDesign) files.
Crop options crop-options
When you implement Smart Crop on images, 蜜豆视频 recommends the following best practice and enforces the following limit:
See also Dynamic Media limitations.
Smart Crop coordinates are aspect ratio dependent. For the various smart crop settings in an Image Profile, if the aspect ratio is the same for the added dimensions in the Image Profile, then the same aspect ratio is sent to Dynamic Media. 蜜豆视频 recommends that you use the same crop area. Doing so ensures that there is no impact to different dimensions used in the Image Profile.
Each Smart Crop generation that you create requires extra processing. For example, adding more than five Smart Crop aspect ratios can result in a slow asset ingestion rate. It also causes an increased load on systems. Because you can apply Smart Crop at the folder level, 蜜豆视频 recommends that you use it on folders only where it is needed.
Guidelines for defining Smart Crop in an Image Profile
To keep Smart Crop usage under control, and to optimize for processing time and storage of crops, 蜜豆视频 recommends the following guidelines and tips:
- Image assets that are going to have a smart crop applied to them must be a minimum of 50 x 50 pixels or larger.
- Ideally, have 10-15 smart crops per image to optimize for screen ratios and processing time.
- Name smart crops based on crop dimensions, not on end usage. Doing so helps to optimize for duplicates where a single dimension is used on multiple pages.
- Create page-wise/asset type-wise Image profiles for specific folders and subfolders instead of a common smart crop profile that is applied to all folders or all assets.
- An Image profile that you apply to subfolders overrides an Image profile that is applied to the folder.
- An Image Profile that contains duplicate smart crop dimensions is not permitted.
- Duplicate named Image Profiles that have smart crop options set are not permitted.
You have two image crop options from which to choose: Pixel Crop or Smart Crop. You can also choose to automate the creation of color and image swatches.
- 蜜豆视频 recommends that you review any generated crops and swatches to ensure that they are appropriate and relevant to your brand and values.
- CMYK image format is not supported with smart crop.
To crop from the sides of an image, you enter the number of pixels to crop from any side or each side of the image. How much of the image is cropped depends on the ppi (pixels per inch) setting in the image file.
An Image Profile pixel crop renders in the following manner:
鈥 Values are Top, Bottom, Left, and Right.
鈥 Top left is considered
0,0 and the pixel crop is calculated from there.鈥 Crop starting point: Left is X and Top is Y
鈥 Horizontal calculation: horizontal pixel dimension of original image minus Left and then minus Right.
鈥 Vertical calculation: vertical pixel height minus Top, and then minus Bottom.
For example, suppose you have a 4000 x 3000 pixel image. You use values: Top=250, Bottom=500, Left=300, Right=700.
From Top Left (300,250) crop using the fill space of (4000-300-700, 3000-250-500, or 3000,2250).
Smart Crop uses the power of artificial intelligence in 蜜豆视频 Sensei to quickly automate the cropping of images in bulk. Smart Crop automatically detects and crops to the focal point in any image to capture the intended point of interest, regardless of screen size.
To use Smart Crop, select Smart Crop from the Cropping Options drop-down list, then to the right of Responsive Image Crop, enable (turn on) the feature.
The default breakpoint sizes of Large, Medium, and Small generally cover the full range of sizes that most images are used on mobile and tablet devices, desktops, and banners. If desired, you can edit the default names of Large, Medium, and Small.
To add more breakpoints, select Add Crop to delete a crop, select the Garbage Can icon.
Automatically locate and generate high-quality swatches from product images that show color or texture.
To use Color and Image Swatch, select Smart Crop from the Cropping Options drop-down list, then to the right of Color and Image Swatch, enable (turn on) the feature. Enter a pixel value in the Width and Height text boxes.
While all image crops are available from the Renditions rail, swatches are only used by way of the Copy URL feature. Use your own viewing component to render the swatch on your site. (The exception to this rule is carousel banners. Dynamic Media provides the viewing component for the swatch used in carousel banners.)
Using image swatches
The URL for image swatches is straightforward. It is:
/is/image/company/<asset_name>:Swatchwhere
:Swatch is appended to the asset request.Using color swatches
To use color swatches, you make a
req=userdata request with the following:/is/image/<company_name>/<swatch_asset_name>:Swatch?req=userdataFor example, the following is a swatch asset in Dynamic Media Classic:
https://my.company.com:8080/is/image/DemoCo/Sleek:Swatchand here is the swatch asset鈥檚 corresponding
req=userdata URL:https://my.company.com:8080/is/image/DemoCo/Sleek:Swatch?req=userdataThe
req=userdata response is as follows:SmartCropDef=Swatch SmartCropHeight=200.0SmartCropRect=0.421671,0.389815,0.0848564,0.0592593,200,200SmartCropType=SwatchSmartCropWidth=200.0SmartSwatchColor=0xA56DB2You can also request a
req=userdata response in either XML or JSON format, as in the following respective URL examples:https://my.company.com:8080/is/image/DemoCo/Sleek:Swatch?req=userdata,jsonhttps://my.company.com:8080/is/image/DemoCo/Sleek:Swatch?req=userdata,xmlNote: Create your own WCM component to request a color swatch and parse the
SmartSwatchColor attribute, represented by a 24-bit RGB hexadecimal value.See also
userdata in the Viewers Reference Guide.Unsharp Mask unsharp-mask
Use Unsharp mask to fine-tune a sharpening filter effect on the final downsampled image. You can control the intensity of the effect, radius of the effect (measured in pixels), and a threshold of contrast that is ignored. This effect uses the same options as 蜜豆视频 Photoshop鈥檚 Unsharp Mask filter.
In Unsharp Mask, you have the following filtering options:
Sharpening is described in Sharpening Images.
Create Dynamic Media Image Profiles creating-image-profiles
To define advanced processing parameters for other asset types, see Configuring Asset Processing.
See Profiles for Processing Metadata, Images, and Videos.
See also Best Practices for Organizing your Digital Assets for using Processing Profiles.
To create Dynamic Media Image Profiles:
-
Select the 蜜豆视频 Experience Manager logo and navigate to Tools > Assets > Image Profiles.
-
Select Create so you can add an Image Profile.
-
Enter a profile name, and values for unsharp mask, crop, or swatch, or both.
Use a profile name that is specific to its intended purpose. For example, if you want to create a profile that generates swatches only 鈥 that is, Smart Crop is disabled (turned off) and Color and Image Swatch is enabled (turned on) 鈥 use the profile name 鈥淪mart Swatches鈥.
See also Smart Crop and Smart Swatch Options and Unsharp Mask.
-
Select Save. The newly created profile appears in the list of available profiles.
Edit or delete Dynamic Media Image Profiles editing-or-deleting-image-profiles
-
Select the Experience Manager logo and navigate to Tools > Assets > Image Profiles.
-
Select the Image Profile that you want to edit or remove. To edit it, select Edit Image Profile. To remove it, select Delete Image Profile.
-
If editing, save the changes. If deleting, confirm that you want to remove the profile.
Apply a Dynamic Media Image Profile to folders applying-an-image-profile-to-folders
When you assign an Image Profile to a folder, any subfolders automatically inherit the profile from its parent folder. This workflow means that you can assign only one Image Profile to a folder. As such, consider carefully the folder structure of where you upload, store, use, and archive assets.
If you assigned a different Image Profile to a folder, the new profile overrides the previous profile. The previously existing folder assets remain unchanged. The new profile is applied on the assets that are added to the folder later.
Folders that have a profile assigned to it are indicated in the user interface using the profile name that appears in the card.
You can apply Image Profiles to specific folders or globally to all assets.
You can reprocess assets in a folder that already has an existing Image Profile that you later changed. See Reprocess assets in a folder after you have edited its processing profile.
Apply Dynamic Media Image Profiles to specific folders applying-image-profiles-to-specific-folders
You can apply an Image Profile to a folder from within the Tools menu or if you are in the folder, from Properties. This section describes how to apply Image Profiles to folders both ways.
Folders that have a profile already assigned to it are indicated by the display of the profile鈥檚 name directly below the folder name.
You can reprocess assets in a folder that already has an existing video profile that you later changed. See Reprocess assets in a folder after you have edited its processing profile.
Apply Dynamic Media Image Profiles to folders from Profiles user interface applying-image-profiles-to-folders-from-profiles-user-interface
-
Select the Experience Manager logo and navigate to Tools > Assets > Image Profiles.
-
Select the Image Profile that you want to apply to a folder or multiple folders.
-
Select Apply Processing Profile to Folders and select the folder or multiple folders you want to use to receive the newly uploaded assets and select Apply. Folders that have a profile already assigned to it are indicated by the display of the profile鈥檚 name directly below the folder name.
Apply Dynamic Media Image Profiles to folders from Properties applying-image-profiles-to-folders-from-properties
-
Select the Experience League logo and navigate to Assets. Then navigate to the parent folder of the folder to which you want to apply an Image Profile.
-
On the folder, select the check mark to select it and then select Properties.
-
Select the Image Profiles tab. From the Profile Name drop-down list, select the profile, then select Save & Close. Folders that have a profile already assigned to it are indicated by the display of the profile鈥檚 name directly below the folder name.
Apply a Dynamic Media Image Profile globally applying-an-image-profile-globally
In addition to applying a profile to a folder, you can also apply one globally so that any content uploaded into Experience Manager assets in any folder has the selected profile applied.
You can reprocess assets in a folder that already has an existing video profile that you later changed. See Reprocessing assets in a folder after you have edited its processing profile.
To apply a Dynamic Media Image Profile globally:
-
Do one of the following:
-
Navigate to
https://<AEM server>/mnt/overlay/dam/gui/content/assets/foldersharewizard.html/content/damand apply the appropriate profile and select Save.
-
Navigate to CRXDE Lite to the following node:
/content/dam/jcr:content.Add the property
imageProfile:/conf/global/settings/dam/adminui-extension/imageprofile/<name of image profile>and select Save All.
-
Edit the smart crop or smart swatch of a single image editing-the-smart-crop-or-smart-swatch-of-a-single-image
- Smart crop is available only in Dynamic Media - Scene7 mode.
You can manually realign or resize the smart crop window of an image to further refine its focal point.
After you edit a smart crop and save, the change is propagated everywhere you use the crop for the specific images.
Rerun smart crop to generate the additional crops again, if necessary.
See also Edit the smart crop or smart swatch of multiple images.
To edit the smart crop or smart swatch of a single image:
-
Select the Experience Manager logo and navigate to Assets, then to the folder that has a smart crop or smart swatch Image Profile applied to it.
-
Select the folder so you can open its contents.
-
Select the image whose smart crop or smart swatch that you want to adjust.
-
In the toolbar, select Smart Crop.
note tip TIP Use the hot key sto edit the smart crops or smart swatches. -
Do any of the following:
- Near the upper-right corner of the page, drag the slider bar left or right to increase or decrease the image display, respectively.
- On the image, drag a corner handle to adjust the size of the viewable area of the crop or swatch.
- On the image, drag the box/swatch to a new location. You can only edit image swatches; color swatches are static.
- Above the image, select Revert to undo all your edits and restore the original crop or swatch.
-
Near the upper-right corner of the page, select Save, then select Close to return to the folder of assets.
Edit the smart crop or smart swatch of multiple images editing-the-smart-crop-or-smart-swatch-of-multiple-images
- Smart crop is available only in Dynamic Media - Scene7 mode.
After you apply an Image Profile 鈥 containing Smart Crop 鈥 to a folder, all images in that folder have a crop applied to them. If desired, you can manually realign or resize the smart crop window in multiple images to further refine their focal point.
After you edit a smart crop and save, the change is propagated everywhere you use the crop for the specific images.
Rerun smart crop to generate the additional crops again, if necessary.
To edit the smart crop or smart swatch of multiple images:
-
Select the Experience Manager logo and navigate to Assets, then to a folder that has a smart crop or smart swatch Image Profile applied to it.
-
On the folder, select the More Actions (鈥) icon, then select Smart Crop.
-
On the Edit Smart Crops page, do any of the following:
-
Adjust the viewing size of images on the page.
To the right of the breakpoint name drop-down list, drag the slider bar left or right to change the size of the viewable image display.
-
Filter the list of viewable images based on breakpoint names. In the example below, the images are filtered on the breakpoint name 鈥淢edium鈥.
Near the upper-right corner of the page, from the drop-down list, select a breakpoint name to filter on what images you see. (See the image above.)
-
Resize the smart crop box. Do any one of the following:
- If the image has a smart crop or a smart swatch only, on the image, drag the corner handle of the crop box to adjust the size of the viewable area of the crop.
- If the image has both a smart crop and a smart swatch, on the image, drag the corner handle of the crop box to adjust the size of the viewable area of the crop. Or, select the smart swatch below the image (color swatches are static), then drag the corner handle of the crop box to adjust the size of the viewable area of the swatch.
-
Move the smart crop box. Do any one of the following:
- If the image has a smart crop or a smart swatch only, on the image, drag the crop box to a new location.
- If the image has both a smart crop and a smart swatch, on the image, drag the smart crop box to a new location. Or, select the smart swatch below the image (color swatches are static), then drag the smart swatch crop box to a new location.
-
Undo all your edits and restore the original smart crop or smart swatch (applies to the current editing session only).
Select Revert above the image.
-
-
Near the upper-right corner of the page, select Save, then select Close to return to the folder of assets.
Remove a Dynamic Media Image Profile from folders removing-an-image-profile-from-folders
When you remove an Image Profile from a folder, any subfolders automatically inherit the removal of the profile from its parent folder. However, any processing of files that has occurred within the folders remains intact.
You can remove an Image Profile from a folder from within the Tools menu or if you are in the folder, from Properties. This section describes how to remove Image Profiles from folders both ways.
Remove Dynamic Media Image Profiles from folders by way of Profiles user interface removing-image-profiles-from-folders-via-profiles-user-interface
-
Select the Experience Manager logo and navigate to Tools > Assets > Image Profiles.
-
Select the Image Profile that you want to remove from a folder or multiple folders.
-
Select Remove Processing Profile from Folders and select the folder or multiple folders you want to use to remove the profile from and select Remove.
You can confirm that the Image Profile is no longer applied to a folder because the name no longer appears below the folder name.
Remove Dynamic Media Image Profiles from folders by way of Properties removing-image-profiles-from-folders-via-properties
-
Select the Experience Manager logo and navigate Assets and then to the folder that you want to remove an Image Profile from.
-
On the folder, select the check mark to select it, then select Properties.
-
Select the Image Profiles tab.
-
From the Profile Name drop-down list, select None, then select Save & Close.
Folders that have a profile already assigned to it are indicated by the display of the profile鈥檚 name directly below the folder name.