蜜豆视频

Introduction intro

Traffic passes through the CDN to an Apache web server layer, which supports modules including Dispatcher. To increase performance, Dispatcher is used primarily as a cache to limit processing on the publish nodes.
Rules can be applied to the Dispatcher configuration to modify any default cache expiration settings, resulting in caching at the CDN. Dispatcher also respects the resulting cache expiration headers if enableTTL is enabled in the Dispatcher configuration, implying that it refreshes specific content even outside of content being republished.

This page also describes how the Dispatcher cache is invalidated and how caching works at the browser level regarding client-side libraries.

Caching caching

HTML/Text html-text

Define DISABLE_DEFAULT_CACHING

This method is useful, for example, when your business logic requires fine-tuning of the age header (with a value based on calendar day) since by default the age header is set to 0. That said, exercise caution when turning off default caching.

Client-Side libraries (js,css) client-side-libraries

Images and any content large enough to be stored in blob storage images

The default behavior for programs created after mid-May 2022 (specifically, for program ids that are higher than 65000) is to cache by default,while also respecting the request鈥檚 authentication context. Older programs (program ids equal or lower than 65000) do not cache blob content by default.

In both cases, the caching headers can be overridden on a finer grained level at the Apache/Dispatcher layer by using the Apache mod_headers directives, for example:

   <LocationMatch "^/content/.*\.(jpeg|jpg)$">
     Header set Cache-Control "max-age=222"
     Header set Age 0
   </LocationMatch>

When modifying the caching headers at the Dispatcher layer, be cautious not to cache too widely. See the discussion in the HTML/text section above. Also, make sure that assets that are meant to be kept private (rather than cached) are not part of the LocationMatch directive filters.

JCR resources (bigger than 16KB) that are stored in blob store are typically served as 302 redirects by AEM. These redirects are intercepted and followed by CDN and the content is delivered directly from the blob store. Only a limited set of headers can be customised on these responses. For example, to customise Content-Disposition you should use the dispatcher directives as follows:

<LocationMatch "\.(?i:pdf)$">
  ForceType application/pdf
  Header set Content-Disposition inline
  </LocationMatch>

The list of headers that can be be customised on blob responses are:

content-security-policy
x-frame-options
x-xss-protection
x-content-type-options
x-robots-tag
access-control-allow-origin
content-disposition
permissions-policy
referrer-policy
x-vhost
content-disposition
cache-control
vary

New default caching behavior new-caching-behavior

The AEM layer sets cache headers depending on whether the cache header has already been set and the value of the request type. If no cache control header is set, public content is cached, and authenticated traffic is set to private. If a cache control header is set, the cache headers are left untouched.

While not recommended, it is possible to change the new default behavior to follow the older behavior (program ids equal or lower than 65000) by setting the Cloud Manager environment variable AEM_BLOB_ENABLE_CACHING_HEADERS to false.

Older default caching behavior old-caching-behavior

The AEM layer does not cache blob content by default.

Now, images in blob storage that are marked private cannot be cached at the Dispatcher using Permission Sensitive Caching. The image is always requested from the AEM origin and served if the user is authorized.

Other content file types in node store other-content

Further Optimizations further-optimizations

Analyzing CDN Cache Hit Ratio analyze-chr

See the cache hit ratio analysis tutorial for information about downloading CDN logs and analyzing your site鈥檚 cache hite ratio, using a dashboard.

HEAD request behavior request-behavior

When a HEAD request is received at the 蜜豆视频 CDN for a resource that is not cached, the request is transformed and received by the Dispatcher and/or AEM instance as a GET request. If the response is cacheable, then subsequent HEAD requests are served from the CDN. If the response is not cacheable, then subsequent HEAD requests are passed to the Dispatcher, or AEM instance, or both, for a time that depends on the Cache-Control TTL.

Marketing campaign parameters marketing-parameters

Website URLs frequently include marketing campaign parameters that are used to track a campaign鈥檚 success.

For environments created in October 2023 or later, to better cache requests, the CDN will remove common marketing related query parameters, specifically those matching the following regex pattern:

^(utm_.*|gclid|gdftrk|_ga|mc_.*|trk_.*|dm_i|_ke|sc_.*|fbclid)$

Submit a support ticket if you want this behavior to be disabled.

For environments created before October 2023, it is recommended to configure the Dispatcher configuration鈥檚 ignoreUrlParams property; see Configuring Dispatcher - Ignoring URL Parameters.

There are two possibilities to ignore marketing parameters. (Where the first one is preferred to ignore cache busting via query parameters):

/ignoreUrlParams {
   /0001 { /glob "*" /type "allow" }
   /0002 { /glob "page" /type "deny" }
   /0003 { /glob "product" /type "deny" }
}

/ignoreUrlParams {
   /0001 { /glob "*" /type "deny" }
   $include "../cache/marketing_query_parameters.any"
}

Dispatcher Cache Invalidation disp

In general, it is not necessary to invalidate the Dispatcher cache. Instead, you should rely on the Dispatcher refreshing its cache when content is being republished and the CDN respecting cache expiration headers.

Dispatcher Cache Invalidation during Activation/Deactivation cache-activation-deactivation

Like previous versions of AEM, publishing or unpublishing pages clears the content from the Dispatcher cache. If a caching issue is suspected, you should republish the pages in question and ensure that a virtual host is available that matches the ServerAlias localhost, which is required for Dispatcher cache invalidation.

When the publish instance receives a new version of a page or asset from the author, it uses the flush agent to invalidate appropriate paths on its Dispatcher. The updated path is removed from the Dispatcher cache, together with its parents, up to a level (you can configure this level with the statfileslevel).

Explicit invalidation of the Dispatcher cache explicit-invalidation

蜜豆视频 recommends that you rely on standard cache headers to control the content delivery life cycle. However, if needed, it is possible to invalidate content directly in Dispatcher.

The following list contains scenarios where you might want to explicitly invalidate the cache (while optionally listening for the completion of the invalidation):

There are two approaches to explicitly invalidate the cache:

The approaches differ in terms of tier availability, the ability to deduplicate events and event processing guarantee. The table below summarizes these options:

The two actions directly related to cache invalidation are Sling Content Distribution (SCD) API Invalidate and Replication API Deactivate.

Also, from the table, you can observe that:

In conclusion, if you are looking to invalidate the Dispatcher cache, the recommended option is to use the SCD API Invalidate action from Author. Also, you can also listen for the event so you can then trigger further downstream actions.

Sling Content Distribution (SCD) sling-distribution

When using the SCD action from Author, the implementation pattern is as follows:

@Reference
private Distributor distributor;

ResourceResolver resolver = ...; // the resource resolver used for authorizing the request
String agentName = "publish";    // the name of the agent used to distribute the request

String pathToInvalidate = "/content/to/invalidate";
DistributionRequest distributionRequest = new SimpleDistributionRequest(DistributionRequestType.INVALIDATE, false, pathToInvalidate);
distributor.distribute(agentName, resolver, distributionRequest);

package org.apache.sling.distribution.journal.shared;

import org.apache.sling.discovery.DiscoveryService;
import org.apache.sling.distribution.journal.impl.event.DistributionEvent;
import org.osgi.service.component.annotations.Component;
import org.osgi.service.component.annotations.Reference;
import org.osgi.service.event.Event;
import org.osgi.service.event.EventHandler;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import static org.apache.sling.distribution.DistributionRequestType.INVALIDATE;
import static org.apache.sling.distribution.event.DistributionEventProperties.DISTRIBUTION_PATHS;
import static org.apache.sling.distribution.event.DistributionEventProperties.DISTRIBUTION_TYPE;
import static org.apache.sling.distribution.event.DistributionEventTopics.AGENT_PACKAGE_DISTRIBUTED;
import static org.osgi.service.event.EventConstants.EVENT_TOPIC;

@Component(immediate = true, service = EventHandler.class, property = {
        EVENT_TOPIC + "=" + AGENT_PACKAGE_DISTRIBUTED
})
public class InvalidatedHandler implements EventHandler {
    private static final Logger LOG = LoggerFactory.getLogger(InvalidatedHandler.class);

    @Reference
    private DiscoveryService discoveryService;

    @Override
    public void handleEvent(Event event) {

        String distributionType = (String) event.getProperty(DISTRIBUTION_TYPE);

        if (INVALIDATE.name().equals(distributionType)) {
            boolean isLeader = discoveryService.getTopology().getLocalInstance().isLeader();
            // process the OSGi event on the leader author instance
            if (isLeader) {
                String[] paths = (String[]) event.getProperty(DISTRIBUTION_PATHS);
                String packageId = (String) event.getProperty(DistributionEvent.PACKAGE_ID);
                invalidated(paths, packageId);
            }
        }
    }

    private void invalidated(String[] paths, String packageId) {
        // custom logic
        LOG.info("Successfully applied package with id {}, paths {}", packageId, paths);
    }
}

Replication API replication-api

Presented below is the implementation pattern when using the replication API Deactivate action:

The flush agent endpoint is not configurable but rather preconfigured to point to Dispatcher, matched with the publish service running alongside the flush agent.

The flush agent can typically be triggered by custom code based on OSGi events or workflows.

String[] paths = 鈥�
ReplicationOptions options = new ReplicationOptions();
options.setSynchronous(true);
options.setFilter( new AgentFilter {
  public boolean isIncluded (Agent agent) {
   return agent.getId().equals("flush");
  }
});

Replicator.replicate (session,ReplicationActionType.DELETE,paths, options);

Client-Side libraries and Version Consistency content-consistency

Pages are composed of HTML, JavaScript, CSS, and images. Customers are encouraged to use the Client-Side Libraries (clientlibs) framework to import JavaScript and CSS resources into HTML pages, accounting for dependencies between JS libraries.

The clientlibs framework provides automatic version management. What this means is that developers can check in changes to JS libraries in source control and the latest version is made available when a customer pushes their release. Without this workflow, developers must manually change HTML with references to the new version of the library, which is especially onerous if the same library shares many HTML templates.

When the new versions of libraries are released to production, the referencing HTML pages are updated with new links to those updated library versions. After the browser cache expires for a given HTML page, there is no concern that the old libraries are loaded from the browser cache. The reason is because the refreshed page (from AEM) now is guaranteed to reference the new versions of the libraries. That is, a refreshed HTML page includes all the latest library versions.

The mechanism behind this ability is a serialized hash, which is appended to the client library link. It ensures a unique, versioned url for the browser to cache the CSS/JS. The serialized hash is only updated when the contents of the client library changes. Which means that if unrelated updates occur (that is, no changes to the underlying css/js of the client library) even with a new deployment, the reference remains the same. In turn, it ensures less disruption to the browser cache.

Enabling Longcache versions of Client-Side Libraries - AEM as a Cloud Service SDK Quickstart enabling-longcache

Default clientlib includes on an HTML page look like the following example:

<link rel="stylesheet" href="/etc.clientlibs/wkndapp/clientlibs/clientlib-base.css" type="text/css">

When strict clientlib versioning is enabled, a long-term hash key is added as a selector to the client library. As a result, the clientlib reference look like this:

<link rel="stylesheet" href="/etc.clientlibs/wkndapp/clientlibs/clientlib-base.lc-7c8c5d228445ff48ab49a8e3c865c562-lc.css" type="text/css">

Strict clientlib versioning is enabled by default in all AEM as a Cloud Service environment.

To enable strict clientlib versioning in the local SDK Quickstart, do the following: