ÃÛ¶¹ÊÓƵ

Using Dispatcher with Multiple Domains using-dispatcher-with-multiple-domains

Use the Dispatcher to process page requests in multiple web domains while supporting the following conditions:

For example, a company publishes websites for two of their brands: Brand A and Brand B. The content for the website pages is authored in AEM, and stored in the same repository workspace:

/
| - content
   | - sitea
       | - content nodes
   | - siteb
       | - content nodes

Pages for BrandA.com are stored below /content/sitea. Client requests for the URL https://BrandA.com/en.html are returned the rendered page for the /content/sitea/en node. Similarly, pages for BrandB.com are stored below /content/siteb.

When using Dispatcher to cache content, make associations between the page URL in the client HTTP request, the path of the corresponding cached file, and the path of the corresponding file in the repository.

Client requests

When clients send HTTP requests to the web server, the URL of the requested page must be resolved to the content in the Dispatcher cache, and eventually to the content in the repository.

Cache Invalidation

When Dispatcher Flush replication agents request that Dispatcher invalidates cached files, the path of the content in the repository must resolve to the content in the cache.

To use Dispatcher with multiple domains, you must configure AEM, Dispatcher, and your web server. The solutions described on this page are general and apply to most environments. Due to the complexity of some AEM topologies, your solution can require further custom configurations to resolve particular issues. You likely must adapt the examples to satisfy your existing IT infrastructure and management policies.

URL Mapping url-mapping

To enable domain URLs and content paths to resolve to cached files, a file path or page URL must be translated during the process. Descriptions of the following common strategies are provided, where path or URL translations occur at different points in the process:

It is desirable to use short URLs for web pages. Typically, page URLs mirror the structure of the repository folders that contain the web content. However, the URLs do not reveal the topmost repository nodes, such as /content. The client is not necessarily aware of the structure of the AEM repository.

General Requirements general-requirements

Your environment must implement the following configurations to support Dispatcher working with multiple domains:

Environment for the Provided Examples environment-for-the-provided-examples

The example solutions that are provided apply to an environment with the following characteristics:

  | - /content
    | - sitea
  |    | - content nodes
    | - siteb
       | - content nodes

Document root of the web server

  | - /usr
    | - lib
      | - apache
        | - httpd-2.4.3
          | - htdocs
            | - content
              | - sitea
                 | - content nodes
              | - siteb
                 | - content nodes

AEM Rewrites Incoming URLs aem-rewrites-incoming-urls

Sling mapping for resource resolution enables you to associate incoming URLs with AEM content paths. Create mappings on the AEM publish instance so that render requests from Dispatcher resolve to the correct content in the repository.

Dispatcher requests for page rendering identify the page using the URL that it is passed from the web server. When the URL includes a domain name, Sling mappings resolve the URL to the content. The following graphic illustrates a mapping of the branda.com/en.html URL to the /content/sitea/en node.

The Dispatcher cache mirrors the repository node structure. Therefore, when page activations occur the resulting requests for invalidating the cached page require no URL or path translations.

Define virtual hosts on the web server define-virtual-hosts-on-the-web-server

Define virtual hosts on the web server so that a different document root can be assigned to each web domain:

The following example httpd.conf file configures two virtual domains for an Apache web server:

With this configuration, the web server performs the following actions when it receives a request for https://branda.com/en/products.html:

httpd.conf httpd-conf

# load the Dispatcher module
LoadModule dispatcher_module modules/mod_dispatcher.so
# configure the Dispatcher module
<IfModule disp_apache2.c>
 DispatcherConfig conf/dispatcher.any
 DispatcherLog    logs/dispatcher.log
 DispatcherLogLevel 3
 DispatcherNoServerHeader 0
 DispatcherDeclineRoot 0
 DispatcherUseProcessedURL 0
 DispatcherPassError 0
</IfModule>

# Define virtual host for brandA.com
<VirtualHost *:80>
  ServerName branda.com
  DocumentRoot /usr/lib/apache/httpd-2.4.3/htdocs/content/sitea
   <Directory /usr/lib/apache/httpd-2.4.3/htdocs/content/sitea>
     <IfModule disp_apache2.c>
       SetHandler dispatcher-handler
       ModMimeUsePathInfo On
     </IfModule>
     Options FollowSymLinks
     AllowOverride None
   </Directory>
</VirtualHost>

# define virtual host for brandB.com
<VirtualHost *:80>
  ServerName brandB.com
  DocumentRoot /usr/lib/apache/httpd-2.4.3/htdocs/content/siteb
   <Directory /usr/lib/apache/httpd-2.4.3/htdocs/content/siteb>
     <IfModule disp_apache2.c>
       SetHandler dispatcher-handler
       ModMimeUsePathInfo On
     </IfModule>
     Options FollowSymLinks
     AllowOverride None
   </Directory>
</VirtualHost>

# document root for web server
DocumentRoot "/usr/lib/apache/httpd-2.4.3/htdocs"

Virtual hosts inherit the DispatcherConfig property value that is configured in the main server section. Virtual hosts can include their own DispatcherConfig property to override the main server configuration.

Configure Dispatcher to Handle Multiple Domains configure-dispatcher-to-handle-multiple-domains

To support URLs that include domain names and their corresponding virtual hosts, define the following Dispatcher farms:

Create Dispatcher farms for virtual hosts

Farms for virtual hosts must have the following configurations so that the URLs in client HTTP requests are resolved to the correct files in the Dispatcher cache:

Also, the AEM publish instance must be designated as the render for the virtual host. Configure other farm properties as required. The following code is an abbreviated farm configuration for the branda.com domain:

/farm_sitea  {
    ...
    /virtualhosts { "branda.com" }
    /renders {
      /rend01  { /hostname "127.0.0.1"  /port "4503" }
    }
    /filter {
      /0001 { /type "deny"  /glob "*" }
      /0023 { /type "allow" /glob "*/en*" }
      ...
     }
    /cache {
      /docroot "/usr/lib/apache/httpd-2.4.3/htdocs/content/sitea"
      ...
   }
   ...
}

Create a Dispatcher farm for cache invalidation

A Dispatcher farm is required for handling requests for invalidating cached files. This farm must be able to access .stat files in the docroot directories of each virtual host.

The following property configurations enable the Dispatcher to resolve files in the AEM content repository from files in the cache:

The /statfileslevelproperty must be high enough so that .stat files are created in the root directory of each virtual host. This property enables the cache of each domain to be invalidated separately. For the example setup, a /statfileslevel value of 2 creates .stat files in the *docroot*/content/sitea directory and the *docroot*/content/siteb directory.

Also, the publish instance must be designated as the render for the virtual host. Configure other farm properties as required. The following code is an abbreviated configuration for the farm that is used for invalidating the cache:

/farm_flush {
    ...
    /virtualhosts   { "invalidation_only" }
    /renders  {
      /rend01  { /hostname "127.0.0.1" /port "4503" }
    }
    /filter   {
      /0001 { /type "deny"  /glob "*" }
      /0023 { /type "allow" /glob "*/content*" }
      ...
      }
    /cache  {
       /docroot "/usr/lib/apache/httpd-2.4.3/htdocs"
       /statfileslevel "2"
       ...
   }
   ...
}

When you start the web server, the Dispatcher log (in debug mode) indicates the initialization of all farms:

Dispatcher initializing (build 4.1.2)
[Fri Nov 02 16:27:18 2012] [D] [24974(140006182991616)] farms[farm_sitea].cache.docroot = /usr/lib/apache/httpd-2.4.3/htdocs/content/sitea
[Fri Nov 02 16:27:18 2012] [D] [24974(140006182991616)] farms[farm_siteb].cache.docroot = /usr/lib/apache/httpd-2.4.3/htdocs/content/siteb
[Fri Nov 02 16:27:18 2012] [D] [24974(140006182991616)] farms[farm_flush].cache.docroot = /usr/lib/apache/httpd-2.4.3/htdocs
[Fri Nov 02 16:27:18 2012] [I] [24974(140006182991616)] Dispatcher initialized (build 4.1.2)

Configure Sling Mapping for Resource Resolution configure-sling-mapping-for-resource-resolution

Use Sling mapping for resource resolution so that domain-based URLs resolve to content on the AEM publish instance. The resource mapping translates the incoming URLs from Dispatcher (originally from client HTTP requests) to content nodes.

To learn about Sling resource mapping, see in the Sling documentation.

Typically, mappings are required for the following resources, although other mappings can be necessary:

After you create the mapping for the content page, to discover more required mappings use a web browser to open a page on the web server. In the error.log file of the publish instance, locate messages about resources that are not found. The following example message indicates that a mapping for /etc/clientlibs is required:

01.11.2012 15:59:24.601 *INFO* [10.36.34.243 [1351799964599] GET /etc/clientlibs/foundation/jquery.js HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Resource /content/sitea/etc/clientlibs/foundation/jquery.js not found

Example resource-mapping nodes

The following table lists the nodes that implement resource mapping for the branda.com domain. Similar nodes are created for the brandb.com domain, such as /etc/map/http/brandb.com. In all cases, mappings are required when references in the HTML page do not resolve correctly in the context of Sling.

Configuring the Dispatcher Flush replication agent configuring-the-dispatcher-flush-replication-agent

The Dispatcher Flush replication agent on the AEM publish instance must send invalidation requests to the correct Dispatcher farm. To target a farm, use the URI property of the Dispatcher Flush replication agent (on the Transport tab). Include the value of the /virtualhost property for the Dispatcher farm that is configured for invalidating the cache:

https://*webserver_name*:*port*/*virtual_host*/dispatcher/invalidate.cache

For example, to use the farm_flush farm of the previous example, the URI is https://localhost:80/invalidation_only/dispatcher/invalidate.cache.

The Web Server Rewrites Incoming URLs the-web-server-rewrites-incoming-urls

To translate domain-based URLs to file paths in the Dispatcher cache, use the internal URL rewriting feature of your web server. For example, client requests for the https://brandA.com/en.html page are translated to the content/sitea/en.htmlfile in the document root of the web server.

The Dispatcher cache mirrors the repository node structure. Therefore, when page activations occur the resulting requests for invalidating the cached page require no URL or path translations.

Define virtual hosts and rewrite rules on the Web server define-virtual-hosts-and-rewrite-rules-on-the-web-server

Configure the following aspects on the web server:

The following example httpd.conf file configures two virtual hosts for an Apache web server:

For example, the web server performs the following actions when it receives a request with the https://brandA.com/en/products.html URL:

httpd.conf httpd-conf-1

# load the Dispatcher module
LoadModule dispatcher_module modules/mod_dispatcher.so
# configure the Dispatcher module
<IfModule disp_apache2.c>
 DispatcherConfig conf/dispatcher.any
 DispatcherLog    logs/dispatcher.log
 DispatcherLogLevel 3
 DispatcherNoServerHeader 0
 DispatcherDeclineRoot 0
 DispatcherUseProcessedURL 1
 DispatcherPassError 0
</IfModule>

# Define virtual host for brandA.com
<VirtualHost *:80>
  ServerName branda.com
  DocumentRoot /usr/lib/apache/httpd-2.4.3/htdocs/content/sitea
  RewriteEngine  on
  RewriteRule    ^/(.*)\.html$  /content/sitea/$1.html [PT]
   <Directory /usr/lib/apache/httpd-2.4.3/htdocs/content/sitea>
     <IfModule disp_apache2.c>
       SetHandler dispatcher-handler
       ModMimeUsePathInfo On
     </IfModule>
     Options FollowSymLinks
     AllowOverride None
   </Directory>
</VirtualHost>

# define virtual host for brandB.com
<VirtualHost *:80>
  ServerName brandB.com
  DocumentRoot /usr/lib/apache/httpd-2.4.3/htdocs/content/siteb
  RewriteEngine  on
  RewriteRule    ^/(.*)\.html$  /content/siteb/$1.html [PT]
   <Directory /usr/lib/apache/httpd-2.4.3/htdocs/content/siteb>
     <IfModule disp_apache2.c>
       SetHandler dispatcher-handler
       ModMimeUsePathInfo On
     </IfModule>
     Options FollowSymLinks
     AllowOverride None
   </Directory>
</VirtualHost>

# document root for web server
DocumentRoot "/usr/lib/apache/httpd-2.4.3/htdocs"

Configure a Dispatcher Farm configure-a-dispatcher-farm

When the web server rewrites URLs, Dispatcher requires a single farm defined according to Configuring Dispatcher. The following configurations are required to support the web server virtual hosts and URL renaming rules:

The following example configuration file is based on the example dispatcher.any file that is installed with Dispatcher. The following changes are required to support the web server configurations of the previous httpd.conf file:

As usual, the document root of the cache is the same as the document root of the web server (line 40): /usr/lib/apache/httpd-2.4.3/htdocs

dispatcher.any dispatcher-any

/name "testDispatcher"
/farms
  {
  /dispfarm0
    {
    /clientheaders
      {
      "*"
      }
    /virtualhosts
      {
      "brandA.com" "brandB.com"
      }
    /renders
      {
      /rend01    {  /hostname "127.0.0.1"   /port "4503"  }
      }
    /filter
      {
      /0001 { /type "deny"  /glob "*" }
      /0023 { /type "allow" /glob "*/content*" }  # disable this rule to allow mapped content only
      /0041 { /type "allow" /glob "* *.css *"   }  # enable css
      /0042 { /type "allow" /glob "* *.gif *"   }  # enable gifs
      /0043 { /type "allow" /glob "* *.ico *"   }  # enable icos
      /0044 { /type "allow" /glob "* *.js *"    }  # enable javascript
      /0045 { /type "allow" /glob "* *.png *"   }  # enable png
      /0046 { /type "allow" /glob "* *.swf *"   }  # enable flash
      /0061 { /type "allow" /glob "POST /content/[.]*.form.html" }  # allow POSTs to form selectors under content
      /0062 { /type "allow" /glob "* /libs/cq/personalization/*"  }  # enable personalization
      /0081 { /type "deny"  /glob "GET *.infinity.json*" }
      /0082 { /type "deny"  /glob "GET *.tidy.json*"     }
      /0083 { /type "deny"  /glob "GET *.sysview.xml*"   }
      /0084 { /type "deny"  /glob "GET *.docview.json*"  }
      /0085 { /type "deny"  /glob "GET *.docview.xml*"  }
      /0086 { /type "deny"  /glob "GET *.*[0-9].json*" }
      /0090 { /type "deny"  /glob "* *.query.json*" }
      }
    /cache
      {
      /docroot "/usr/lib/apache/httpd-2.4.3/htdocs"
      /statfileslevel "2"
      /allowAuthorized "0"
      /rules
        {
        /0000  { /glob "*"     /type "allow"  }
        }
      /invalidate
        {
        /0000  {   /glob "*" /type "deny"  }
        /0001 {  /glob "*.html" /type "allow"  }
        }
      /allowedClients
        {
        }
      }
    /statistics
      {
      /categories
        {
        /html  { /glob "*.html" }
        /others  {  /glob "*"  }
        }
      }
    }
  }

Rewriting Links to Non-HTML Files rewriting-links-to-non-html-files

To rewrite references to files that have extensions other than .html or .htm, create a Sling rewriter transformer component and add it to the default rewriter pipeline.

Rewrite references when resource paths do not resolve correctly in the web server context. For example, a transformer is required when image-generating components create links such as /content/sitea/en/products.navimage.png. The topnav component of the How to Create a Fully Featured Internet Website creates such links.

The is a module that post-processes Sling output. SAX pipeline implementations of the rewriter consist of a generator, one or more transformers, and a serializer:

The AEM Default Rewriter Pipeline the-aem-default-rewriter-pipeline

AEM uses a default pipeline rewriter that processes documents of the type text/html:

The /libs/cq/config/rewriter/default node defines the pipeline.

Creating a Transformer creating-a-transformer

To create a transformer component and use it in a pipeline, perform the following tasks:

The following examples implement a transformer that rewrites references to image files.

The examples are not robust. Do not use them in a production environment.

Example TransformerFactory implementation example-transformerfactory-implementation

package com.adobe.example;

import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Service;
import org.apache.felix.scr.annotations.Property;

import org.apache.sling.rewriter.Transformer;
import org.apache.sling.rewriter.TransformerFactory;

@Component
@Service
public class MyRewriterTransformerFactory implements TransformerFactory {
    /* Define the alias */
    @Property(value="mytransformer")
    static final String PIPELINE_TYPE ="pipeline.type";

    public Transformer createTransformer() {

        return new MyRewriterTransformer ();
    }
}

Example Transformer implementation example-transformer-implementation

package com.adobe.example;

import java.io.IOException;

import org.apache.cocoon.xml.sax.AbstractSAXPipe;

import org.apache.sling.api.SlingHttpServletRequest;
import org.apache.sling.rewriter.ProcessingComponentConfiguration;
import org.apache.sling.rewriter.ProcessingContext;
import org.apache.sling.rewriter.Transformer;

import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.AttributesImpl;

import javax.servlet.http.HttpServletRequest;

public class MyRewriterTransformer extends AbstractSAXPipe implements Transformer {

 private static final Logger log = LoggerFactory.getLogger(MyRewriterTransformer.class);
 private SlingHttpServletRequest httpRequest;
 /* The element and attribute to act on  */
 private static final String ATT_NAME = new String("src");
 private static final String EL_NAME = new String("img");

 public MyRewriterTransformer () {
 }
 public void dispose() {
 }
 public void init(ProcessingContext context, ProcessingComponentConfiguration config) throws IOException {
  this.httpRequest = context.getRequest();
  log.debug("Transforming request {}.", httpRequest.getRequestURI());
 }
 @Override
 public void startElement (String nsUri, String localname, String qname, Attributes atts) throws SAXException {
  /* copy the element attributes */
  AttributesImpl linkAtts = new AttributesImpl(atts);
  /* Only interested in EL_NAME elements */
  if(EL_NAME.equalsIgnoreCase(localname)){

   /* iterate through the attributes of the element and act only on ATT_NAME attributes */
   for (int i=0; i < linkAtts.getLength(); i++) {
    if (ATT_NAME.equalsIgnoreCase(linkAtts.getLocalName(i))) {
     String path_in_link = linkAtts.getValue(i);

     /* use the resource resolver of the http request to reverse-resolve the path  */
     String mappedPath = httpRequest.getResourceResolver().map(httpRequest, path_in_link);

     log.info("Tranformed {} to {}.", path_in_link,mappedPath);

     /* update the attribute value */
     linkAtts.setValue(i,mappedPath);
    }
   }

  }
        /* return updated attributes to super and continue with the transformer chain */
 super.startElement(nsUri, localname, qname, linkAtts);
 }
}

Adding the Transformer to a Rewriter Pipeline adding-the-transformer-to-a-rewriter-pipeline

Create a JCR node that defines a pipeline that uses your transformer. The following node definition creates a pipeline that processes text/html files. The default AEM generator and parser for HTML are used.

Rewriter configuration node - XML representation rewriter-configuration-node-xml-representation

<?xml version="1.0" encoding="UTF-8"?>
<jcr:root xmlns:jcr="https://www.jcp.org/jcr/1.0" xmlns:nt="https://www.jcp.org/jcr/nt/1.0"
    jcr:primaryType="nt:unstructured"
    contentTypes="[text/html]"
    enabled="{Boolean}true"
    generatorType="htmlparser"
    order="5"
    serializerType="htmlwriter"
    transformerTypes="[mytransformer]">
</jcr:root>

The following graphic shows the CRXDE Lite representation of the node: