ÃÛ¶¹ÊÓƵ

Base URL

https://image.adobe.io/pie/psdService

API tag

v1.12.31

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to edit is stored.

(Input) File location

Enter or map the URL or path of the file that you want to edit.

(Options > Document > Image size) Height

Enter or map the height of the image in pixels.

(Options > Document > Image size) Width

Enter or map the width of the image in pixels.

(Options > Document > Canvas size) Top

Enter or map, in pixels, the y coordinate of the document's upper-left corner.

(Options > Document > Canvas size) Bottom

Enter or map, in pixels, the y coordinate of the document's lower-right corner.

(Options > Document > Canvas size) Left

Enter or map, in pixels, the x coordinate of the document's upper-left corner.

(Options > Document > Canvas size) Right

Enter or map, in pixels, the x coordinate of the document's lower-right corner.

(Options > Document) Trim

Select Transparent pixels to base the trim on transparent pixels in the image.

(Options) Default font

Enter the full postscript name of the font to be used as the global default for the document. This font will be used for any text layer which has a missing font and no other font has been specifically provided for that layer. If this font is missing, the option specified in Manage missing fonts will take effect.

(Options) Fonts

For each font that the document needs, click Add item and enter the font's storage location and file location.

(Options) Manage missing fonts

Select the action to take if there are one or more missing fonts in the document.

• fail: The job will not succeed and the status will be set to failed, with the details of the error provided in the details section in the status.
• useDefault: The job will succeed, however, by default all the missing fonts will be replaced with ArialMT.

(Options) Layers

For each layer you want to add, click Add item and and fill in the layer details.

For details about layer options, see in the ÃÛ¶¹ÊÓƵ Photoshop documentation.

Outputs

For each converted file you want to create, click Add item and enter the storage, location, and type as listed in this table.

(Output) Storage

Select the file service where the you want the new file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the new file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

(Output) Type

Select the file type that you want to convert the file to.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to color correct is stored.

(Input) File location

Enter or map the URL or path of the file that you want to color correct.

(Output) Storage

Select the file service where the you want the new file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the new file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

(Output) Type

Select the file type that you want to convert the file to.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to remove the background from is stored.

(Input) File location

Enter or map the URL or path of the file that you want to remove the background from.

Outputs

For each converted file you want to create, click Add item and enter the storage, location, and type as listed in this table.

(Output) Storage

Select the file service where the you want the new file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the new file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

(Output) Type

Select the file type that you want to convert the file to.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to create a mask from is stored.

(Input) File location

Enter or map the URL or path of the file that you want to create a mask from.

(Output) Storage

Select the file service where the you want the mask file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the mask file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Color space

Select whether the output image uses RGB or RGBA color.

Mask format

Select whether the mask should be soft (feathered) or binary.

Optimize

Select Performance to optimize for speed, or Batch to allow wait time.

Post process

Version

Default is 4.0

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Input file storage

Select the file service where the file you want to edit is stored.

Input file URL

Enter or map the URL or path of the file that you want to edit.

Manage missing fonts

Select the action to take if there are one or more missing fonts in the document. If the font is not provided, the module uses the default font.

Default font

Enter the full postscript name of the font to be used as the global default for the document. This font will be used for any text layer which has a missing font and no other font has been specifically provided for that layer. If this font is missing, the option specified in Manage missing fonts will take effect.

Layers

For details about layer options, see in the ÃÛ¶¹ÊÓƵ Photoshop documentation.

Output file storage

Select the file service where the you want the edited file to be stored.

Output file URL

Enter or map the URL or path of where the edited file will be stored.

Output file type

Select the file type for the edited file.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists.

Compression

Select the compression level for the output file.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to edit is stored.

(Input) File location

Enter or map the URL or path of the file that you want to edit.

Action JSON

Enter the JSON command for the action you want to take.

Fonts / Patterns / Brushes / Additional images

For each font, pattern, brush, or additional image that you want to use in this action, click Add item and enter the item's storage and file location.

Font / Pattern / Brush file URL

Enter or map the URL or path of the file that you want to use.

Outputs file storage

Select the file service where the you want the edited file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

Output file URL

Enter or map the URL or path of where the edited file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

Output file type

Select the file type for the edited file.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists.

Compression

Select the compression level for the output file.

Outputs

For each converted file you want to create, click Add item and enter the storage, location, and type as listed in this table.

(Output) Storage

Select the file service where the you want the new file to be stored.

(Output) File location

Enter or map the URL or path of where the new file will be stored.

(Output) Type

Select the file type that you want to convert the file to.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Input file storage

Select the file service where the file you want to edit is stored.

Input file URL

Enter or map the URL or path of the file that you want to edit.

Output file storage

Select the file service where the you want the edited file to be stored.

Output file URL

Enter or map the URL or path of where the edited file will be stored.

Output file type

Select the file type for the edited file.

Other fields

For details about other Depth Blur options, see in the ÃÛ¶¹ÊÓƵ Photoshop API documentation.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists.

Compression

Select the compression level for the output file.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Input file storage

Select the file service where the file you want to edit is stored.

Input file URL

Enter or map the URL or path of the file that you want to edit.

Actions file storage

Select the file service where actions file is stored.

Actions file URL

Enter or map the URL or path of the actions file.

Action name

If you only want to execute a particular action, you may specify which action to play from the ActionSet.

Font / Pattern / Brush storage

Select the file service where the file you want to use is stored.

Font / Pattern / Brush file URL

Enter or map the URL or path of the file that you want to use.

Output file storage

Select the file service where the you want the edited file to be stored.

Output file URL

Enter or map the URL or path of where the edited file will be stored.

Output file type

Select the file type for the edited file.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists.

Compression

Select the compression level for the output file.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Input file storage

Select the file service where the file you want to crop is stored.

Input file URL

Enter or map the URL or path of the file that you want to crop.

Unit

Select whether you want to describe the height and width adjustment in pixels or as a percent.

Width

Enter or map amount of width padding you want to add.

Height

Enter or map amount of height padding you want to add.

Output file storage

Select the file service where the you want the edited file to be stored.

Output file URL

Enter or map the URL or path of where the edited file will be stored.

Output file type

Select the file type for the edited file.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists.

Compression

Select the compression level for the output file.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Input file storage

Select the file service where the file you want to retrieve layer information from is stored.

Input file URL

Enter or map the URL or path of the file that you want to retrieve layer information from.

Thumbnails

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

URL

Enter a path relative to https://image.adobe.io/pie/psdService. Example: /photoshopActions

Method

Select the HTTP request method you need to configure the API call. For more information, see HTTP request methods.

Headers

Add the headers of the request in the form of a standard JSON object.

For example, {"Content-type":"application/json"}

Workfront Fusion adds authorization headers automatically.

Query String

Enter the request query string.

Body

Add the body content for the API call in the form of a standard JSON object.

Note:

When using conditional statements such as if in your JSON, put the quotation marks outside of the conditional statement.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the file you want to remove the background from is stored.

(Input) File location

Enter or map the URL or path of the file that you want to remove the background from.

(Output) Storage

Select the file service where the you want the new file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the new file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Color space

Select whether the output image uses RGB or RGBA color.

Mask format

Select whether the edges of the image should be soft (feathered) or binary.

Optimize

Select Performance to optimize for speed, or Batch to allow wait time.

Post process

Version

Default is 4.0

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Input) Storage

Select the file service where the Smart Object is stored.

(Input) File location

Enter or map the URL or path of the Smart Object.

Layers

For each layer you want to add to the Smart Object, click Add item and Enter the object's name or ID, the file service where the Smart Object is stored, and the the URL or path of the layer.

For descriptions of the advances settings in this area, see in the Photoshop API documentation

Outputs

For each new rendition you want the module to produce, click Add item and fill in the following fields. You can have a maximum of 25 output files.

(Output) Storage

Select the file service where the you want the new file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the new file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

(Output) Width

The width, in pixels, of the output file. The module will preserve the original aspect ratio.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

Storage

Select the file service where the file you want to resize is stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

File location

Enter or map the URL or path of the file that you want to resize. This is only necessary if you have not chosen Fusion internal storage for the output storage.

Outputs

For each converted file you want to create, click Add item and enter the storage, location, and other options as listed in this table.

Type

Select the file type that you want to convert the file to.

Width

Enter a number that represents the width, in pixels, of the resized image. Aspect ratio will be preserved.

Max width

When width is 0, Max with can be provided to get the size. Max width takes precedence with it is smaller than the document width.

Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Trim to canvas

Select Yes to trim the renditions to Canvas size, or No to make the renditions Layer Size.

Connection

For instructions on creating a connection to ÃÛ¶¹ÊÓƵ Photoshop, see Create a connection to ÃÛ¶¹ÊÓƵ Photoshop in this article.

(Base / Input) Storage

Select the file service where the file you want to add a watermark to is stored.

(Base / Input) File location

Enter or map the URL or path of the file that you want to add a watermark to.

(Watermark / Input) Storage

Select the file service where the watermark you want to add is stored.

(Watermark / Input) Storage

Select the file service where the watermark you want to add is stored.

(Watermark / Bounds) Height

Enter or map the desired height of the watermark in pixels.

(Watermark / Bounds) Width

Enter or map the desired width of the watermark in pixels.

(Watermark / Bounds) Left

Enter or map the distance in pixels from the left side of the image that the watermark should be.

(Watermark / Bounds) Top

Enter or map the distance in pixels from the top of the image that the watermark should be.

(Output) Storage

Select the file service where the you want the watermarked file to be stored.

Selecting Fusion internal storage makes the file available for later modules, but does not make the file available outside of the scenario.

(Output) File location

Enter or map the URL or path of where the watermarked file will be stored. This is only necessary if you have not chosen Fusion internal storage for the output storage.

(Output) Type

Select the file type that you want to convert the file to.

(Output) Width

The width, in pixels, of the output file. The module will preserve the original aspect ratio.

(Output) Overwrite

Select whether the newly edited file will overwrite any output file that already exists. This applies only to files in ÃÛ¶¹ÊÓƵ storage.

Maximum number of returned results

Enter or map the maximum number of records you want the module to return during each scenario execution cycle.