Responsive Layout responsive-layout
AEM lets you have a responsive layout for your pages by using the Layout Container component.
This provides a paragraph system that lets you position components within a responsive grid. This grid can rearrange the layout according to the device/window size and format. The component is used in conjunction with the Layout mode, which lets you create and edit your responsive layout dependent on device.
The layout container:
-
Provides horizontal snap to grid, together with the ability to place components into the grid side-by-side and define when they should collapse/reflow.
-
Uses pre-defined breakpoints (for example, for phone, tablet, and so on) to let you define the required behavior of content for related devices/orientation.
- For example, you can customize the component size or whether the component can be seen on specific devices.
-
Can be nested to allow column control.
The user can then see how the content will be rendered for specific devices using the emulator.
AEM realizes responsive layout for your pages using a combination of mechanisms:
-
Layout Container component
This component is available in the component browser and provides a grid-paragraph system to let you add and position components within a responsive grid. It can also be set as the default paragraph system on your page.
-
Once the layout container is positioned on your page you can use the Layout mode to position content within the responsive grid.
-
Emulator
This lets you create and edit responsive websites that rearrange the layout according to device/window size by resizing components interactively. The user can then see how the content will be rendered using the emulator.
With these responsive grid mechanisms you can:
- Use breakpoints to define differing content layouts based on device width (related to device type and orientation).
- Use these same breakpoints and content layouts to ensure that your content is responsive to the size of the browser window on the desktop.
- Use horizontal snap to grid allowing you to place components in the grid, resize as required, and define when they should collapse/reflow to be side-by-side or above/below.
- Hide components for specific device layouts.
- Realize column control.
Depending on your project, the Layout Container might be used as the default paragraph system for your pages or as a component available to be added to your page via the component browser (or both).
Layout Definitions, Device Emulation, and Breakpoints layout-definitions-device-emulation-and-breakpoints
When you are creating your website content you want to ensure that your content is displayed appropriate to the device being used to view it.
AEM lets you define layouts dependent on the width of the device:
-
The emulator enables you to emulate these layouts on a range of devices. In addition to the device type, the orientation, selected by the Rotate device option, can impact the breakpoint selected as the width changes.
-
Breakpoints are the points which separate the layout definitions.
- They effectively define the maximum width (in pixels) of any device using a specific layout.
- The breakpoints are usually valid for a selection of devices, dependent on the width of their displays.
- The range of a breakpoint extends left until the next breakpoint.
- You cannot select the breakpoint specifically, selecting a device and orientation will automatically select the appropriate breakpoint.
The device Desktop, which does not have a specific width, relates to the default breakpoint (that is, everything above the last configured breakpoint).
When using the emulator, you select a specific device for emulation and layout definition and the related breakpoint will be highlighted too. Any layout changes that you make will be applicable for other devices to which the breakpoint applies, that is, any devices positioned to the left of the active breakpoint marker, but before the next breakpoint marker.
For example, when you select the device iPhone 6 Plus (defined with a width of 540 pixels) for emulation and layout, the breakpoint Phone (defined as 768 pixels) will be activated too. Any layout changes you make for the iPhone 6 will be applicable to other devices under the Phones breakpoint, such as iPhone 5 (defined as 320 pixels).
Selecting a Device to Emulate selecting-a-device-to-emulate
-
Open the required page for editing. For example:
http://localhost:4502/editor.html/content/we-retail/us/en/experience.html -
Select the Emulator icon from the top toolbar:
-
The emulator toolbar opens.
The emulator toolbar displays additional layout options:
-
Rotate device - Lets you rotate a device from vertical (portrait) orientation to horizontal (landscape) orientation and conversely.
-
Select Device - Define a specific device to emulate from a list (see next step for details)
-
-
To select a specific device to emulate you can either:
- Use the Select Device icon and select from a drop-down selector.
- Click the device indicator in the emulator toolbar.
-
Once a specific device has been selected you can:
- See the active marker for the selected device, such as iPad.
- See the active marker for the appropriate breakpoint such as Tablet.
- The blue dotted line represents the fold for the selected device (here an iPhone 6).
- The fold can also be considered the page line break (not to be confused with the breakpoints) for the content. This is displayed for convenience to show what part of the content the user will see on the device before scrolling.
- The line for the fold will not be shown if the height of the device being emulated is higher than the screen size.
- The fold is shown for the author’s convenience and is not shown on the published page.
Adding a Layout Container and its Content (Edit mode) adding-a-layout-container-and-its-content-edit-mode
A Layout Container is a paragraph system that:
- Contains other components.
- Defines the layout.
- Responds to changes.
-
The Layout Container is available as a standard component in the Components Browser. From here you can drag it to the required location on the page after which you will see the Drag Components here placeholder.
-
You can then add components to the layout container. These components will hold the actual content:
Selecting and Taking Action on a Layout Container (Edit mode) selecting-and-taking-action-on-a-layout-container-edit-mode
As with other components, you can select and then take action on (cut, copy, delete) a Layout Container (when in Edit mode):
-
If you mouseover or select the grid placeholder, the action menu is displayed.
You need to select the Parent option.
-
If the layout component is nested, selecting the Parent option presents a drop-down selection, allowing you to select the nested layout container or its parent(s).
When you mouse over the container names in the drop-down, their outlines will be displayed on the page.
- The lowest nested layout container will be outlined in black.
- The next-lowest nested layout container will be in a dark grey.
- Every successive container will be lin a lighter shade of grey.
-
This will highlight the entire grid with its content. The action toolbar is shown, from where you can select an action such as Delete.
Defining Layouts (Layout mode) defining-layouts-layout-mode
To configure the layout of a responsive grid implemented with the Layout Container you need to use the Layout mode.
Layout mode can be started in two ways.
-
By using the mode menu in the toolbar and choosing Layout mode
- Select the Layout mode just as you would switch to Edit mode or Targeting mode.
- Layout mode remains persistent and you do not leave Layout mode until you select another mode via the mode selector.
-
When editing an individual component.
- By using the Layout option in the component’s quick action menu, you can switch to Layout mode.
- Layout mode persists while editing the component and reverts to Edit mode once focus changes to another component.
When in layout mode you can perform various actions on a grid:
-
Resize the content components using the blue dots. Resizing will always snap-to-grid. When resizing, the background grid is shown to aid alignment:
note note NOTE Proportions and ratios will be maintained when components such as Images are resized. -
Click on a content component, the toolbar lets you:
-
Parent
Lets you select the entire layout container component for taking action on the whole.
-
Float to new line
The component will be moved to a new line, dependent on the space available within the grid.
-
Hide component
The component will be made invisible (it can be restored from the toolbar of the layout container).
-
-
In Layout mode you can click on the Drag components here to select the entire component. This will show the toolbar for this mode.
The toolbar will have different options depending on the state of the layout component and the components belonging to it. For example:
-
Parent - Select the parent component.
-
Show hidden components - Reveal all or individual components. The number indicates how many hidden components there currently are.thecounter shows how many components are hidden.
-
Revert breakpoint layout - Revert to the default layout. This means that no customized layout will be imposed.
-
Float to new line - Move the component up a position if spacing allows.
-
Hide component - Hide the current component.
note note NOTE In the above example the float and hide actions are available because this Layout Container is nested within a parent Layout Container. -
Unhide components
Select the parent components to show the action toolbar with the Show hidden components option. In this example, two components are hidden.
Selecting the Show hidden components option will display in blue the components that are currently hidden in their original positions.
Selecting Restore all will unhide all hidden components.
-